DOSAGE AND ADMINISTRATION
2.1 Dosing Instructions for CLL
Recommended Dosage:
The recommended dose is 100 mg/m2 administered intravenously over 30 minutes on Days 1 and 2 of a 28-day cycle, up to 6 cycles.
Dose Delays, Dose Modifications and Reinitiation of Therapy for CLL :
TREANDA administration should be delayed in the event of Grade 4 hematologic toxicity or clinically significant ≥ Grade 2 non-hematologic toxicity. Once non-hematologic toxicity has recovered to ≤ Grade 1 and/or the blood counts have improved [Absolute Neutrophil Count (ANC) ≥ 1 x 109/L, platelets ≥ 75 x 109/L], TREANDA can be reinitiated at the discretion of the treating physician. In addition, dose reduction may be warranted. [See Warnings and Precautions ]
Dose modifications for hematologic toxicity: for Grade 3 or greater toxicity, reduce the dose to 50 mg/m2 on Days 1 and 2 of each cycle; if Grade 3 or greater toxicity recurs, reduce the dose to 25 mg/m2 on Days 1 and 2 of each cycle.
Dose modifications for non-hematologic toxicity: for clinically significant Grade 3 or greater toxicity, reduce the dose to 50 mg/m2 on Days 1 and 2 of each cycle.
Dose re-escalation in subsequent cycles may be considered at the discretion of the treating physician.
2.2 Dosing Instructions for NHL
Recommended Dosage:
The recommended dose is 120 mg/m2 administered intravenously over 60 minutes on Days 1 and 2 of a 21-day cycle, up to 8 cycles.
Dose Delays, Dose Modifications and Reinitiation of Therapy for NHL:
TREANDA administration should be delayed in the event of a Grade 4 hematologic toxicity or clinically significant ≥ Grade 2 non-hematologic toxicity. Once non-hematologic toxicity has recovered to ≤ Grade 1 and/or the blood counts have improved [Absolute Neutrophil Count (ANC) ≥ 1 x 109/L, platelets ≥ 75 x 109/L], TREANDA can be reinitiated at the discretion of the treating physician. In addition, dose reduction may be warranted. [See Warnings and Precautions ]
Dose modifications for hematologic toxicity: for Grade 4 toxicity, reduce the dose to 90 mg/m2 on Days 1 and 2 of each cycle; if Grade 4 toxicity recurs, reduce the dose to 60 mg/m2 on Days 1 and 2 of each cycle.
Dose modifications for non-hematologic toxicity: for Grade 3 or greater toxicity, reduce the dose to 90 mg/m2 on Days 1 and 2 of each cycle; if Grade 3 or greater toxicity recurs, reduce the dose to 60 mg/m2 on Days 1 and 2 of each cycle.
2.3 General Considerations for Tumor Lysis Syndrome
Consider using allopurinol as prevention for patients at high risk of tumor lysis syndrome for the first few weeks of treatment.
2.4 Reconstitution/Preparation for Intravenous Administration
- Aseptically reconstitute each 100 mg TREANDA vial with 20 mL of only Sterile Water for Injection, USP. Shake well to yield a clear, colorless to a pale yellow solution with a bendamustine HCl concentration of 5 mg/mL.The lyophilized powder should completely dissolve in 5 minutes. If particulate matter is observed, the reconstituted product should not be used.
-
Aseptically withdraw the volume needed for the required dose (based on 5 mg/mL concentration) and immediately transfer to a 500 mL infusion bag of 0.9% Sodium Chloride Injection, USP (normal saline). As an alternative to 0.9% Sodium Chloride Injection, USP (normal saline), a 500 mL infusion bag of 2.5% Dextrose/0.45% Sodium Chloride Injection, USP, may be considered. The resulting final concentration of bendamustine HCl in the infusion bag should be within 0.2 – 0.6 mg/mL. The reconstituted solution must be transferred to the infusion bag within 30 minutes of reconstitution. After transferring, thoroughly mix the contents of the infusion bag. The admixture should be a clear and colorless to slightly yellow solution.
Use Sterile Water for Injection, USP, for reconstitution and then either 0.9% Sodium Chloride Injection, USP, or 2.5% Dextrose/0.45% Sodium Chloride Injection, USP, for dilution, as outlined above. No other diluents have been shown to be compatible.
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Any unused solution should be discarded according to institutional procedures for antineoplastics.
2.5 Admixture Stability
TREANDA contains no antimicrobial preservative. The admixture should be prepared as close as possible to the time of patient administration.
Once diluted with either 0.9% Sodium Chloride Injection, USP, or 2.5% Dextrose/0.45% Sodium Chloride Injection, USP, the final admixture is stable for 24 hours when stored refrigerated (2-8°C or 36-47°F) or for 3 hours when stored at room temperature (15-30°C or 59-86°F) and room light. Administration of TREANDA must be completed within this period.
DOSAGE FORMS AND STRENGTHS
TREANDA for Injection single-use vial containing 100 mg of bendamustine HCl as white to off-white lyophilized powder.
|
HOW SUPPLIED/STORAGE AND HANDLING
16.1 Safe Handling and Disposal
As with other potentially toxic anticancer agents, care should be exercised in the handling and preparation of solutions prepared from TREANDA. The use of gloves and safety glasses is recommended to avoid exposure in case of breakage of the vial or other accidental spillage. If a solution of TREANDA contacts the skin, wash the skin immediately and thoroughly with soap and water. If TREANDA contacts the mucous membranes, flush thoroughly with water.
Procedures for the proper handling and disposal of anticancer drugs should be considered. Several guidelines on the subject have been published3-6. There is no general agreement that all of the procedures recommended in the guidelines are necessary or appropriate.
16.2 How Supplied
TREANDA (bendamustine hydrochloride) for Injection is supplied in individual cartons of 20 mL amber single-use vials containing 100 mg of bendamustine hydrochloride as a white to off-white lyophilized powder.
NDC 63459-391-20 TREANDA (bendamustine hydrochloride) for Injection, 100 mg/vial
16.3 Storage
TREANDA may be stored up to 25°C (77°F) with excursions permitted up to 30°C (86°F) (see USP Controlled Room Temperature). Retain in original package until time of use to protect from light.
|
